MoreBeer did a great job of remixing the knurling nut but I tweaked it just a little so that no gluing is involved. The inside channel is larger than the exterior hole for the button so you can use the nut to screw the button on. Everything else is the same.

Source: Arcade Coindoor Lock with Credit Button by amp1276

I wanted my Fast Draw gottlieb pinball to “free play” There is a solution to short the zero_Position swotch on the Credit Unit. But this solution is now totally “clean” for me as you don’t see the credit, the game starting immediately when you push the replay button… So I have created this part that you can insert into the coin back lever in the door. Now when you push the coin back button you get a free play, the credit counter increments properly. And if you want to use this credit, simply push on the replay button ! https://youtu.be/r5GKp98Q4KA

Source: Gottlieb EM pinball Coin Door hack by f2knpw

Very simple ball guides for my Gottlieb’s pinball. Should be ref A9393, A9395 and A9396 see : http://www.pbresource.com/rollover.htm Not exactly as the original (flat design) Print them bottom up, 100% fill (to get nice light pattern)

Source: Gottlieb Pinball ball guides by f2knpw

Based on an original 1972 Williams eject plate and tested in machine.

Source: Williams Pinball Eject Plate by amp1276

Pinball accessory for Williams EM games with a 1.375″ ID kickout hole. This sleeve protector stops the wear on the hole when ball is ejected. Installed from top of playfield. Check the ID of the kickout hole on your game before using this file.

Source: Williams Pinball kickout hole protector by P2K