https://github.com/AndyQ/OctoPrint-PrusaMeshMap/archive/master.zip

Source: AndyQ/OctoPrint-PrusaMeshMap: This plugin performs a mesh bed leveling operation then returns the results as an easy to read heatmap.

This script has a lot of variables you can tweak. Research continues, but there’s a lot to work with now. Version 1.1 now lets you adjust the arrow indicator with more parameters. About One of the most stressful things about making multiple copies of an electronics project is reliably locating interface controls that you like. Maybe you can locate them one time, but can you locate them a year from now? two years from now? And how much do they cost? For example, I found some slide potentiometer knobs at Mouser.com for about $0.50 apiece two years ago, and they ran out of them… forever. I tried sourcing them elsewhere, and the best I could find was a seller that had them for $4.00 apiece (!!wtf!!). So that really sucks. One strategy is to buy in bulk. But, buy too few and you may run out and pay twice for shipping. Buy too many and you end up with unused knobs sitting around not making your money back. That also sucks. Round potentiometer knobs are somewhat readily available. But still, they can be from $0.80 to $5.00 each, and if you can’t find enough for your project, that can be problematic. Mostly I’m tired of paying multiple dollars for things that should basically cost $0.25 apiece. Aesthetics are important too, so having options beyond what’s out there is nice. A different strategy is to print them yourself as you need them. No shipping, no running out, and you get to call the shots on how it looks and how it fits. Now, I like this way. Plus, for my project, making the knobs just goes along with the rest of the stuff I’ve done myself.

Source: Parametric Potentiometer Knob with OpenSCAD by stevecooley

Source: The Original Prusa 3D Printers – Knowledge base – Extrusion multiplier calibration

These are height adjustable anti-vibration feet for Ikea Lack Tables. Each foot consists of two printed parts and a JB6368 anti-vibration pad that slips on the end. The female part is attached to the table leg and has internal threading. The male part has external threading, holds the anti-vibration pad, and screws into the female part which allows height adjustment to level the table. Amazon – JB6368 Anti-Vibration Pads

Source: Ikea Lack Table Adjustable Anti-Vibration Feet by RJFeddeler

Stronger frame for Prusa i3 MK2(s), MK2.5 and MK3. Contribute to gregsaun/prusa_i3_bear_upgrade development by creating an account on GitHub.

Source: gregsaun/prusa_i3_bear_upgrade

Do your own “cartel luminoso” (signboards, placard?? I don’t know how to say that in english, sorry) with LEDs strips!!! I made a full alphabet for you!! So you can print the words you want, put inside the LED strip and It will be already to use!! I made “EL NARDO” for my xaranga, ( a kind of music band here in spain), It’s 0,75 metres long, with RGB LEDs strips. We went to play in a band contest, and I proposed to make something cool with my 3D printer, something new, something anybody has, but the “boss” said no, but I thought it will be a good idea, so I made it and I give it to my xaranga as a surprise!! All of them were in shock when they saw it few minutes before our turn to play !! And now we use it in every gig!!!!!!! People use to take photos with it when we are playing, and anyone believe my when I say I made it with a 3D printer!!!!! https://www.youtube.com/watch?v=A4DXmNQbqMU aaaah!! I’m the tuba, you can see me playing in front of my creation!!! :D:Dhttps://www.youtube.com/watch?v=CDSohpuKoVA Now I made another as a present for a friend of mine, he plays the clarinet in the video, when he saw the nardo’s placard he ask me If I can do it bigger for his company and of course I can!!! 2m LONG!!!!! This year, during the town’s festivities, he is going to be the captain of his company: LLAURADORS, ( villajoiosa, Spain), and this is his present for them!! The premiere is tomorrow (24/07/2015), I will take photos and videos!! I’m very nervious, because I don’t know what the reaction of the people will be!! The font of LLAURADORS is different because it is like the logo of the company, but it’s the same design for the bottom and top side than the alphabet I uploaded https://youtu.be/QB3zKkhmouE it was a success!!!!! The people of the LLAURADORS company love it!! this is the moment when they saw it! *I’m the guy with the blue t-shirt, I was playing with my xaranga, El Nardo, in other company, i went to see the result of my job http://youtu.be/n9hWr8s7DjA

Source: full alphabet for LED strips by el_tuba

If you need to store stuff in letters, this is the way to go! Use the customizer to adapt the text and sizes as needed. This is a version which prints together with the respective lids. Each letter and also the dots of ‘i’ and ‘j’ are connected together, so after printing it will not fall apart. Big thanks go to Cebisovab for letting me use the pictures of her big colourful letter boxes here. If you like it, also check out my configurable text based creations, name plate, pyramid text, round text, sweeping name plate and text storage, which is similar to this one, but without the lids. Have also a look at my configurable pack of dogs and rabbits. Please post your makes as “i made one”! I am curious what my customizable designs are used for and wether printing works out well. Also if you have ideas or wishes, let me know. Have fun!

Source: Customizable text box with lid by makkuro